2606 - Electronic Industrial Controls Mechanic

Show All / Hide All

Federal Occupation Description

Federal Occupation Description

This standard covers nonsupervisory work involved in the installation, maintenance, troubleshooting, repair, and calibration of electronic controls and indicating and recording systems used on industrial machinery or engines, in automated materials storage and handling systems, in aircraft engine and similar test facilities, or in energy monitoring and control systems. This work requires knowledge of the practical application of electronics theories and circuits that are applicable to power, timing, motion control, indicating devices, and pulse and counting mechanisms, including special purpose digital computers (microprocessors) dedicated to control functions, as well as a knowledge of industrial equipment operation and processes.

For job opportunities in this series, go to the Office of Personnel Management USAJOBS website.

Other Federal Occupations

It is not uncommon for individuals in one federal occupational series to perform duties related to another series within the same federal occupational group. To find out about the certifications for another series in the ELECTRONIC EQUIPMENT INSTALLATION AND MAINTENANCE FAMILY, click on that series below. Note that credentials have not yet been identified for all series – links are provided only to those series for which the identification of credentials has been completed. Additional series will be added over time.

The following certifications have been identified as most relevant to the broad duties of this federal occupational series. Please note that these credentials may not reflect all of the unique job functions that you perform within your organization. Also these credentials may require additional education, training or experience. For more information about any credential, click on the credential title below.

Compare Credential Agency Related As GI Bill® Accreditation ID
Associate Electronics Technician (CETa) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome GI BillGI Bill AccreditationAccreditation
Fiber Optics Installer (FOI) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome GI BillGI Bill AccreditationAccreditation
Mobile Electronics Certified Professional - Basic Is Not In Demand Consumer Technology Association (CTA) someSome    
Certified Satellite Installer (CSI) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome GI BillGI Bill AccreditationAccreditation
Telecommunications Electronics Technician (TCM) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome GI BillGI Bill AccreditationAccreditation
RADAR Electronics Technician (RAD) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome GI BillGI Bill AccreditationAccreditation
Fiber Optics Technician (FOT) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome GI BillGI Bill AccreditationAccreditation
Master Certified Electronics Technician (CETma) Is Not In Demand Electronics Technicians Association, International (ETA-I) mostMost GI BillGI Bill  
Senior Certified Electronics Technician (CETsr) Is Not In Demand Electronics Technicians Association, International (ETA-I) mostMost GI BillGI Bill AccreditationAccreditation
Certified Electronics Technician - Associate-Level Is Not In Demand International Society of Certified Electronics Technicians (ISCET) someSome GI BillGI Bill  
Certified Electronics Technician - Journeyman-Level - Communications Is Not In Demand International Society of Certified Electronics Technicians (ISCET) someSome GI BillGI Bill  
Certified Electronics Technician - Journeyman-Level - Computer Is Not In Demand International Society of Certified Electronics Technicians (ISCET) mostMost GI BillGI Bill  
Certified Electronics Technician - Journeyman-Level - Industrial Is Not In Demand International Society of Certified Electronics Technicians (ISCET) mostMost GI BillGI Bill  
Certified Electronics Technician - Journeyman-Level - Medical Is Not In Demand International Society of Certified Electronics Technicians (ISCET) mostMost GI BillGI Bill  
Certified Electronics Technician - Journeyman-Level - Radar Is Not In Demand International Society of Certified Electronics Technicians (ISCET) someSome GI BillGI Bill  
Wireless Communications Electronics Technician (WCM) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome GI BillGI Bill AccreditationAccreditation
Biomedical Electronics Technician (BMD) Is Not In Demand Electronics Technicians Association, International (ETA-I) mostMost GI BillGI Bill AccreditationAccreditation
Data Cabling Installer (DCI) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome GI BillGI Bill AccreditationAccreditation
Industrial Electronics Technician (IND) In DemandIs In Demand Electronics Technicians Association, International (ETA-I) mostMost GI BillGI Bill AccreditationAccreditation
Biomedical Imaging Electronics Technician (BIET) Is Not In Demand Electronics Technicians Association, International (ETA-I) mostMost GI BillGI Bill AccreditationAccreditation
Certified Alarm Security Technician (CAST) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome GI BillGI Bill AccreditationAccreditation
Line and Antenna Sweep (LAS) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Avionics Electronics Technician (AVN) Is Not In Demand Electronics Technicians Association, International (ETA-I) mostMost GI BillGI Bill AccreditationAccreditation
Aircraft Electronics Technician (AET) Is Not In Demand National Center for Aerospace & Transportation Technologies (NCATT) mostMost    
Certified Electronics Technician - Journeyman-Level - Consumer Electronics Is Not In Demand International Society of Certified Electronics Technicians (ISCET) someSome GI BillGI Bill  
Medium/Heavy Truck - Electrical/Electronic Systems (T6) Is Not In Demand National Institute for Automotive Service Excellence (ASE) someSome GI BillGI Bill  
Truck Equipment - Electrical/Electronic Systems Installation and Repair (E2) Is Not In Demand National Institute for Automotive Service Excellence (ASE) someSome GI BillGI Bill  
School Bus Technician - Electrical/Electronic Systems (S6) Is Not In Demand National Institute for Automotive Service Excellence (ASE) someSome GI BillGI Bill  
Transit Bus - Electrical/Electronic Systems (H6) Is Not In Demand National Institute for Automotive Service Excellence (ASE) someSome    
Automobile/Light Truck - Electrical/Electronic Systems (A6) Is Not In Demand National Institute for Automotive Service Excellence (ASE) someSome GI BillGI Bill  
Radio Frequency Identification Technical Specialist (RFID) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
AET-Radio Communication Systems (AET-RCS) Is Not In Demand National Center for Aerospace & Transportation Technologies (NCATT) mostMost    
AET-Dependent Navigation Systems (AET-DNS) Is Not In Demand National Center for Aerospace & Transportation Technologies (NCATT) mostMost    
Broadband Voice over Internet Protocol (B-VoIP) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Electronic Security Networking Technician (ESNT) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Fiber Optics Technician (Outside Plant) (FOT-OSP) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Residential Electronics Systems Integrator (RESI) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
AET-Onboard Communication & Safety Systems Standards (OCS) Is Not In Demand National Center for Aerospace & Transportation Technologies (NCATT) someSome    
Wireless Network Technician (WNT) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
AET-Autonomous Navigation Systems (ANS) Is Not In Demand National Center for Aerospace & Transportation Technologies (NCATT) mostMost    
General Communications Technician - Level 1 (GCT1) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Distributed Antenna Systems Technician (DAS) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Basic Electricity and Electronics - Alternating Current (BEE-AC) Is Not In Demand Certifying Technical Employee Competence (CertTEC) someSome GI BillGI Bill AccreditationAccreditation
Basic Electricity and Electronics - Direct Current (BEE-DC) Is Not In Demand Certifying Technical Employee Competence (CertTEC) someSome   AccreditationAccreditation
Basic Electricity and Electronics - Analog (BEE-A) Is Not In Demand Certifying Technical Employee Competence (CertTEC) someSome GI BillGI Bill AccreditationAccreditation
Basic Electricity and Electronics - Digital (BEE-D) Is Not In Demand Certifying Technical Employee Competence (CertTEC) someSome   AccreditationAccreditation
Termination and Testing Technician (TTT) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Small Wind Installer - Level 1 (SWI-LVL1) Is Not In Demand Electronics Technicians Association, International (ETA-I) mostMost   AccreditationAccreditation
RF Interference Mitigation (RFIM) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Residential Electronics Systems Integrator Security-Surveillance (RESI-SS) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Residential Electronics Systems Integrator Environmental Control (RESI-EC) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Residential Electronics Systems Integrator Computer Networking (RESI-CN) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Residential Electronics Systems Integrator Closed Circuit TV (RESI-CCTV) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Residential Electronics Systems Integrator Audio-Video (RESI-AV) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Photovoltaic Installer - Level 1 (PVI-LVL1) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Photonics Technician Specialist (PTS) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Photonics Technician Operator (PTO) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Passive Intermodulation Testing (PIM) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Mobile Communications and Electronics Installer (MCEI) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Master Residential Electronics Systems Integrator (RESIma) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome    
General Communications Technician - Level 2 (GCT2) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Gaming and Vending Technician (GVT) Is Not In Demand Electronics Technicians Association, International (ETA-I) mostMost   AccreditationAccreditation
Electric Vehicle Technician (EVT) Is Not In Demand Electronics Technicians Association, International (ETA-I) mostMost   AccreditationAccreditation
Commercial Audio Technician (CAT) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Certified Satellite Installer S-MATV (CSI-SMATV) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Certified Satellite Installer Commercial (CSI-COM) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Certified Satellite Installer C and KU band (CSI-C/KU) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Certified Satellite Installer Antenna (CSI-A) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Electronics Associate DC (EM1) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Electronics Associate AC (EM2) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Electronics Associate Analog (EM3) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Electronics Associate Digital (EM4) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Electronics Associate Comprehensive (EM5) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
TRN Wireless Communications Technician (TRN) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Fiber To The Antenna (FTTA) Is Not In Demand Electronics Technicians Association, International (ETA-I) someSome   AccreditationAccreditation
Source Inspector Electrical Equipment (SIEE) Is Not In Demand American Petroleum Institute (API) someSome    
Mobile Electronics Certified Professional - Advance Is Not In Demand Consumer Technology Association (CTA) someSome    
Mobile Electronics Certified Professional - Master Is Not In Demand Consumer Technology Association (CTA) someSome    

State Licenses

Some states have specific licensing requirements for the following related civilian occupations. These state licenses may require additional education, training or experience. Click on the occupation below to get more information on state requirements from the U.S. Department of Labor.

Related Civilian Private Sector Occupations

The following civilian private sector occupations are similar to the duties performed by 2606 - Electronic Industrial Controls Mechanic. These occupations may require additional education, training or experience. For more information about these occupations, click on the civilian occupation below.

Civilian Job Duties Matched Bright Outlook Registered Apprenticeship Local Salary Info
Aerospace Engineering and Operations Technicians mostMost   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Avionics Technicians mostMost   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Computer, Automated Teller, and Office Machine Repairers someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Electrical and Electronic Equipment Assemblers someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Electrical and Electronics Installers and Repairers, Transportation Equipment someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Electrical and Electronics Repairers, Commercial and Industrial Equipment someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Electrical Engineering Technicians someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Electro-Mechanical Technicians someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Electromechanical Engineering Technologists mostMost     find local salaryfind local salary
Electromechanical Equipment Assemblers someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Electronic Drafters someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Electronic Equipment Installers and Repairers, Motor Vehicles someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Electronic Home Entertainment Equipment Installers and Repairers someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Electronics Engineering Technicians mostMost   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Inspectors, Testers, Sorters, Samplers, and Weighers someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Mechanical Engineering Technicians someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Medical Equipment Repairers someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Photonics Technicians someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Radio Mechanics someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Radio, Cellular, and Tower Equipment Installers and Repairers someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Robotics Technicians mostMost     find local salaryfind local salary
Security and Fire Alarm Systems Installers someSome Bright OutlookBright Outlook  Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Telecommunications Equipment Installers and Repairers, Except Line Installers someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Top
This is an official U.S. Navy websiteUpdated: October 16, 2019
Click here to go to Associate Electronics Technician (CETa) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Associate Electronics Technician (CETa) certification is an entry-level credential for electronics technicians who have less than two years of experience or who have trade school training in the field of electronics. Applicants for the CETa must meet the experience or training requirement and pass the exam.

Click here to go to Fiber Optics Installer (FOI) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Fiber Optic Installers (FOI) certification is an intermediate-level credential for fiber optic technicians. The FOI exam focuses on a general understanding of optical fiber installation, connectorization, splicing, and testing; candidates for the FOI certification are expected to be familiar with optical fibers, connectors, and splice performance characteristics. Candidates must be proficient in the installation of connectors on various types of fiber optic cables using epoxies; additionally, FOI technicians perform mechanical and fusion splicing. Candidates must pass a written exam.

Click here to go to Mobile Electronics Certified Professional - Basic COOL Snapshot page.

Credential description coming soon.

Click here to go to Certified Satellite Installer (CSI) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Certified Satellite Installer (CSI) certification is an entry-level professional credential for satellite installers. CSI candidates should have knowledge of satellite communications history and theory, satellite dish reflectors, cabling, amplifiers, Satellite System Installation-site surveys, satellite receivers-digital technology, interfacing with other consumer electronics equipment, transmission-internet systems, troubleshooting, repairs, sun outage, safety, and related information. Candidates must pass a written exam.

Click here to go to Telecommunications Electronics Technician (TCM) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Telecommunications Electronics Technician (TCM) is an intermediate-level technician credential for professionals who work in the telecommunications field. TCM candidates must have knowledge of wired and wireless communications basic concepts, which are then applicable to various types of voice, data and video systems. Telecommunications Electronics Technicians must be knowledgeable and have abilities in the following technical areas: Cables and Cabling, Analog Telephony, Equipment, Telecom Safety and Mathematics, Transmission Service Providers and Protocols, Distribution Methods, Computer, Digital Telephony, Interfacing, Internet, Network Infrastructures and Topologies, Office Wiring, Wireless Telephony, Test Equipment, Optical Wiring, and Troubleshooting. Candidates that hold a Standalone TCM and later complete the Associate CET (CETa), are eligible to upgrade to a Journeyman CET.

Click here to go to RADAR Electronics Technician (RAD) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), RADAR Electronics Technician (RAD) is a journeyman-level certification recommended for radar electronics technicians with knowledge of radar basics and concepts applicable to all types of avionics, maritime and land systems. RADAR Electronics Technicians must be knowledgeable and have abilities in the following technical and human relations areas: Block Diagrams and Schematics, Components, Cabling and Antennas, Hand Tools & Soldering, Mathematics, Amplifiers, RADAR Transceivers, Interfacing, Satellite, Wireless, and Data Communications, Computers and Digital Concepts, Software Programming, Troubleshooting, and People Relations. Candidates must hold the Associate Electronics Technician (CETa) certification prior to taking the RADAR exam. Individuals with a valid FCC Element 8, and either the ETA Associate CET (CETa) or a Journeyman (CET) certification, are eligible for a rollover to an ETA RADAR certification. Candidates must take a written exam.

Click here to go to Fiber Optics Technician (FOT) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Fiber Optics Technician (FOT) certification is an intermediate-level fiber optics professional credential. Candidates for the FOT certification are expected to have knowledge of fiber optics concepts pertaining to designing, configuring, installing, and maintaining fiber optics systems. FOTs test and troubleshoot Local Area Networks (LANs) with various faults. The FOT certification is designed for technicians, system analysts, design engineers, managers, telecommunications professionals, fusion splicers, mechanical splicers, end users, and others whose professions require fiber optics knowledge and skills. The prerequisite for the FOT certification is the ETA-I Fiber Optics Installer (FOI), or equivalent work experience. Candidates must pass a written exam.

Click here to go to Master Certified Electronics Technician (CETma) COOL Snapshot page.

Credential description coming soon.

Click here to go to Senior Certified Electronics Technician (CETsr) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Senior Certified Electronics Technician (CETsr) certification is intended for, but not limited to, the professional electronics service technicians, technician managers, consultants, and electronics educators who have been active in the industry for six or more years. The CETsr candidates must pass an entire certification exam which includes the Associate level exam, plus one of the specialized Journeyman options. The CETsr exam focuses on advanced practice and theory applicable to the electronics specialty selected.

Click here to go to Certified Electronics Technician - Associate-Level COOL Snapshot page.

Renewal Period: 4 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician - Associate-Level is an entry-level certification. This certification validates the candidate's basic electronic knowledge for entry-level electronic professions. The exam covers basic electronics, math, DC and AC circuits, transistors and troubleshooting. The Associate CET is also a pre-requisite for ISCET Journeyman level certifications. Candidates must pass a written exam.

Click here to go to Certified Electronics Technician - Journeyman-Level - Communications COOL Snapshot page.

Renewal Period: 2 years

Certified Electronics Technician - Journeyman-Level - Communications. This is an entry-level certification exam. Technicians working in this field will have knowledge in the following areas; communications which include 2-way transceivers and the servicing of these types of equipment. Also, Receiver's basic communication theory, transmitters, deviation, sensitivity, quieting and troubleshooting. Applicants must pass a written exam.

Click here to go to Certified Electronics Technician - Journeyman-Level - Computer COOL Snapshot page.

Renewal Period: 2 years

Certified Electronics Technician - Journeyman-Level - Computer Electronics. This is an entry-level certification exam. Technicians working in this field will have knowledge in the following areas; operation of computer systems with the greatest emphasis on the hardware, basic arithmetic and logic operations as related to computer theory, computer organization, input and output equipment, and memory and storage. The technician should have some knowledge of software and programming, and be able to explain troubleshooting procedures. Applicants must pass a written exam.

Click here to go to Certified Electronics Technician - Journeyman-Level - Industrial COOL Snapshot page.

Renewal Period: 2 years

Certified Electronics Technician - Journeyman-Level - Industrial. This is an entry-level certification exam. Technicians working in this field will have knowledge in the following areas; characteristics and applications of industrial electronics components, the operation of devices such as triacs, SCRs, diacs, and Shockley diodes. Also covered are various kinds of transducers, operation of transistors and op-amps, single-phase and three-phase control systems, motors, PLCs and industrial electronics safety and basic knowledge of hydraulic and pneumatic systems. Applicants must pass a written exam.

Click here to go to Certified Electronics Technician - Journeyman-Level - Medical COOL Snapshot page.

Renewal Period: 2 years

Certified Electronics Technician - Journeyman-Level - Medical. This is an entry-level certification exam. Technicians working in this field will have knowledge in the following areas; Electrical safety and accuracy of calibration for electro medical instruments, plus the need for prompt in-house electronic service, are the priorities in this option. The applicant is expected to demonstrate a familiarity with the basic concepts and vocabulary of instrumentation, telemetry, measurements, differential amplifier and operational amplifier applications. Applicants must pass a written exam.

Click here to go to Certified Electronics Technician - Journeyman-Level - Radar COOL Snapshot page.

Renewal Period: 2 years

Certified Electronics Technician - Journeyman-Level - Radar. This is an entry-level certification exam. Technicians working in this field will have knowledge in the following areas; General knowledge of both pulse radar and continuous wave radar operation is necessary for taking this Journeyman option. This test covers transmitters and receivers, CRT display systems and their power supplies, antennas, transmission lines and their characteristics. Applicants must pass a written exam.

Click here to go to Wireless Communications Electronics Technician (WCM) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Wireless Communications Electronics Technician (WCM) certification is an intermediate journeyman-level credential for wireless technicians. The WCM certification is targeted toward workers performing installation, maintenance and repair of mobile and fixed radio communications systems. Candidates seeking the ETA-I WCM credential are required to have a basic education in fundamental electronics. Candidates must pass the Associate (CETa) exam before qualifying to sit for the Journeyman level certification exam. To be eligible for a rollover to an ETA-I Wireless Communications (WCM) certification, candidates must hold a valid FCC GROL and either an ETA-I Associate CET (CETa), General Communications Technician - Level 1 (GCT1) or Journeyman CET certification.

Click here to go to Biomedical Electronics Technician (BMD) COOL Snapshot page.

Renewal Period: 4 years

Electronics Technicians Association, International (ETA-I), Biomedical Electronics Technician (BMD) candidates are expected to obtain knowledge of the principles of modern biomedical techniques, the proper procedure in the care, handling and maintenance of biomedical equipment and to display an attitude/behavior expected of an electronics technician who works in a hospital or healthcare environment. Once the CET has acquired these skills, abilities and knowledge, he or she will be able to enter employment in any part of the biomedical electronics field. Candidates must pass a written examination. The BMD is a Journeyman certification that requires two years of experience and completion of the CETa certification or equivalent.

Click here to go to Data Cabling Installer (DCI) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Data Cabling Installer (DCI) certification is a Journeyman-level credential recommended for individuals a basic level of installer experience and training. DCIs are expected to understand the basic installation and service concepts of copper cabling, which are applicable to all the procedures required to safely and competently install communications cabling. Candidates must pass an exam.

Click here to go to Industrial Electronics Technician (IND) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Industrial Electronics Technician (IND) certification is an intermediate journeyman-level credential for electronics technicians. Candidates applying for the IND certification are expected to understand basic industrial electronics concepts applicable to various specialty areas of industrial electronics; Additionally, candidates must meet minimum experience requirements of at least two years working in the industry, this may include electronics training. IND candidates must be knowledgeable and have skills in the following areas: Amplifiers, Optical Wiring, Block Diagrams Schematics, Power Supplies, Test Equipment Tools, Mathematics, Computers Digital Concepts, Safety, Satellite Wireless Data, Communications, Cabling, Troubleshooting, Motors, Programmable Logic Controllers, and Software. Candidate must pass a written exam.

Click here to go to Biomedical Imaging Electronics Technician (BIET) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Biomedical Equipment Technician (BIET) certification candidates have the expertise to maintain, calibrate, adjust, and repair many different types of equipment. BIET's work on medical imaging equipment including, x-rays, defibrillators, and patient monitors. BIET's use hand tools, software, electronic tools, multi meters, and soldering irons to complete the repair on sophisticated medical equipment. BIETs should be familiar with the following topics: Anatomy, Medical Terminology, Computer, Electro/Mechanical Safety, Picture Archive Communication System, Diagnostic Ultrasound Equipment, Building Wiring, Basic Radiographic Equipment, Film Processing, Test Equipment, Magnetic Resonance Imaging, Computed Tomography, Nuclear Medicine, Codes and Regulations, Troubleshooting, Radiation Safety, Radiation Physics, and Linear Accelerators. Candidates must pass a written exam.

Click here to go to Certified Alarm Security Technician (CAST) COOL Snapshot page.

Renewal Period: 4 years

Electronic Technicians Association, International (ETA-I), Certified Alarm Security Technicians (CAST) must be able to identify and describe the operations of alarms and have basic understanding of technology and its configuration, fiber optics telecommunications, software, and computers and locks. The CAST should be able to explain, understand, and use block diagrams and schematics, digital concepts, software, hand tools soldering, data communications, and cameras and intercoms. The certification may be considered a journeyman level or stand alone credential. Candidates must pass a written exam.

Click here to go to Line and Antenna Sweep (LAS) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-1), Line and Antenna Sweep (LAS) is a frequency domain reflectometer (FDR) certification. Requirements for the LAS certification include completion of a training course from an approved ETA-I school, hands-on testing and verification of line and antenna sweeping skills using modern FDR equipment, and a written exam. Basic knowledge of fundamental electronics and wireless communications is recommended. The LAS is a stand-alone certification but may be upgraded to a Journeyman CET by meeting additional requirements. Candidates must pass a written exam.

Click here to go to Avionics Electronics Technician (AVN) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Avionics Electronics Technicians (AVN) certification is designed to assess the knowledge and skills of individuals who install, maintain and adjust electronics equipment, cabling and the accessories used in aviation communications and control equipment. It is highly recommended that the Avionics technician have an FCC General Radio Telephone Operator license. Candidates must hold the Associate Certified Electronics Technician (CETa) certification prior to taking the Avionics Electronics Technician exam. Several of the topics covered in this examination include: Avionics Systems, Cabling, Computers and Digital Concepts, Amplifiers, Interfacing, Antennas and Transmission Lines Components, Mathematics, Network Topologies and Infrastructures, People Relations, Optical Cabling, Safety, Test Equipment and Tools and Satellite Communications.

Click here to go to Aircraft Electronics Technician (AET) COOL Snapshot page.

Renewal Period: Lifetime

National Center for Aerospace & Transportation Technologies (NCATT), Aircraft Electronics Technician (AET) is NCATT's primary certification and is required for NCATT endorsements in the career field. AET certification recognizes the knowledge base of the advanced aerospace technician and promotes integrity, safety, and professionalism in the aerospace workforce. AET knowledge and skills include basic electronics facts, terminology, and principles, common maintenance practices, fundamentals of equipment maintenance, and aircraft fundamentals. There are no AET eligibility requirements. The AET written exam is open to all individuals regardless of career field, training, education or experience.

Click here to go to Certified Electronics Technician - Journeyman-Level - Consumer Electronics COOL Snapshot page.

Certified Electronics Technician - Journeyman-Level - Consumer Electronics. This is an entry-level certification exam. Technicians working in this field will have knowledge in the following areas; antennas and transmission lines, digital and linear circuits in consumer electronics, servicing problems on televisions and VCRs, use of test equipment, and troubleshooting consumer products. Applicants must pass a written exam.

Click here to go to Medium/Heavy Truck - Electrical/Electronic Systems (T6) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), Medium/Heavy Truck - Electrical/Electronic Systems (T6) certification is for individuals who possess knowledge and skills in the diagnosis and repair of the general electrical/electronic system, battery and starting system, charging system, lighting system, and related vehicle systems. To earn the Medium/Heavy Truck - Electrical/Electronic Systems (T6) certification, candidates must have at least two years of relevant hands-on work experience and pass a written exam.

Click here to go to Truck Equipment - Electrical/Electronic Systems Installation and Repair (E2) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), Truck Equipment - Electrical/Electronic Systems Installation and Repair (E2) certification is for Truck Equipment Technicians who can demonstrate knowledge of the skills necessary to install, diagnose, service, and repair truck equipment and related support systems on all classes of trucks and tractors. To earn the Truck Equipment - Electrical/Electronic Systems Installation and Repair (E2) certification, candidates must have two years of relevant hands-on work experience and pass a written exam.

Click here to go to School Bus Technician - Electrical/Electronic Systems (S6) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), School Bus Technician - Electrical/Electronic Systems (S6) certification is for technicians who possess knowledge and skills in general electrical/electronic system diagnosis, battery diagnosis and service, and diagnosis and repair of the starting system, charging system, lighting systems, and gauges and instrument warning devices. To earn the School Bus Technician - Electrical/Electronic Systems (S6) certification, candidates must have at least two years of hands-on work experience in school bus repair and pass a written exam.

Click here to go to Transit Bus - Electrical/Electronic Systems (H6) COOL Snapshot page.

Credential description coming soon.

Click here to go to Automobile/Light Truck - Electrical/Electronic Systems (A6) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), Automobile/Light Truck - Electrical/Electronic Systems (A6) certification is for Automobile and Light Truck (up to Class 3) Technicians who can demonstrate knowledge of the skills necessary to diagnose, service, and repair cars, SUVs, and light duty trucks. To earn the Automobile/Light Truck - Electrical/Electronic Systems (A6) certification, candidates must have at least two years of hands-on work experience in automotive repair and pass a written exam.

Click here to go to Radio Frequency Identification Technical Specialist (RFID) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-1), Radio Frequency Identification Technical Specialist (RFID) certification is an intermediate-level credential for electronics technicians. RFIDs specialize in radio frequency identification and the related electronic tools. RFID candidates understand electronics communication principles and conduct site surveys and analysis, tagging, reader selection, and installation, configuration and maintenance of RFID hardware and software. Candidates must pass a written exam.

Click here to go to AET-Radio Communication Systems (AET-RCS) COOL Snapshot page.

Renewal Period: Lifetime

National Center for Aerospace & Transportation Technologies (NCATT), Aircraft Electronics Technician-Radio Communication Systems (AET-RCS) endorsement recognizes the knowledge base of the advanced aerospace technician and promotes integrity, safety, and professionalism in the aerospace workforce. AET-RCS knowledge and skills include safety, radio transmitters/receivers, communication systems, and satellite communications. Candidates must hold the NCATT Aircraft Electronics Technician (AET) certification prior to taking the AET-RCS written exam.

Click here to go to AET-Dependent Navigation Systems (AET-DNS) COOL Snapshot page.

Renewal Period: Lifetime

National Center for Aerospace & Transportation Technologies (NCATT), Aircraft Electronics Technician-Dependent Navigation Systems (AET-DNS) endorsement recognizes the knowledge base of the advanced aerospace technician and promotes integrity, safety, and professionalism in the aerospace workforce. AET-DNS knowledge and skills include safety, antennas, Global Positioning Satellite (GPS) system, VHF Omni Directional Range (VOR) System, Distance Measurement Equipment (DME) System, Automatic Direction Finder (ADF) System, and Instrument Landing System (ILS). Candidates must hold the NCATT Aircraft Electronics Technician (AET) certification prior to taking the AET-DNS written exam.

Click here to go to Broadband Voice over Internet Protocol (B-VoIP) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Broadband-Voice over Internet Protocol (B-VoIP) certification is an intermediate-level credential for B-VoIP technicians who install, maintain, repair and replace voice, data and video over Internet Protocol equipment. B-VoIP technicians connect B-VoIP equipment to local and wide area computer network systems, perform cable installation, replacement, modernization, and support interconnection between different cable types and wireless equipment; they also configure and provision B-VoIP equipment and transmission media. B-VoIP technicians have knowledge of protocols used for the telecommunications industry and are familiar with telecom industry acronyms and language. Though ETA-I does not require any specific training, education or experience for candidates of the B-VoIP certification, candidates are strongly encouraged to have the requisite knowledge and experience necessary to challenge the exam.

Click here to go to Electronic Security Networking Technician (ESNT) COOL Snapshot page.

Electronic Security Networking Technician (ESNT) is directed towards workers who can properly cable, connect, install, program and troubleshoot IP-enabled security devices onto local area networks and the Internet. Candidates must pass an examination, which covers the nine general categories of training. The categories covered are General Networking, Network Addressing, Network Cabling, Network Devices, Internet Connections, Network Services, IP-Enabled Physical Security Devices, Network Security, and Common Network Testing and Troubleshooting. This examination, plus the Associate CET exam go together to form the complete journeyman CET exam.

Click here to go to Fiber Optics Technician (Outside Plant) (FOT-OSP) COOL Snapshot page.

The Electronics Technicians Association, International (ETA-I), Fiber Optics Technician (Outside Plant) (FOT-OSP) is an intermediate-level certification for professionals who terminate, test and troubleshoot single-mode fiber optic communication systems. FOT-OSPs understand optical loss budgets, not to exceed loss budgets and has the knowledge and skills required for troubleshooting single-mode OSP fiber optic communications systems addressing the roles of attenuation, dispersion and refection and how to identify and troubleshoot each. Though ETA-I does not require any specific education, training, or experience for the standalone FOT-OSP, candidates are strongly encouraged to have the requisite knowledge and experience necessary to challenge the exam.

Click here to go to Residential Electronics Systems Integrator (RESI) COOL Snapshot page.

The Residential Electronics Systems Integrator (RESI) is a professional certification for those who design and oversee the installation and integration of electronics systems in residences and light commercial buildings. The objective of the Integrator is to produce a residential or light commercial electronics systems package that will allow all data, control, and communication signals to be integrated at the premise controller and converged into one secure cohesive communication stream, to either be used within the premise or to be passed back and forth through the gateway. The Integrator should be proficient in the many protocols used over diverse media to communicate with and control residential and light commercial electronics systems.

Click here to go to AET-Onboard Communication & Safety Systems Standards (OCS) COOL Snapshot page.

The National Center for Aerospace & Transportation Technologies (NCATT), AET-Onboard Communication & Safety Systems Standards (OCS) certification is an intermediate-level aerospace technician credential. The OCS certification is recommended for professionals who specialize in the inspection and maintenance of aircraft communication and safety systems. To receive the OCS certification, candidates are required to pass an exam.

Click here to go to Wireless Network Technician (WNT) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Wireless Network Technician (WNT) is a mid-career level professional credential. Technicians who have obtained knowledge of the operation and maintenance of wireless networking concepts, RF and IR propagation, and modulation technologies are recommended to pursue the WNT. The WNT certifies a technician's acquisition of the skills and knowledge necessary for employment in the networking industry. Candidates are not required to pass the Associate, or basic electronics exam. Candidates must take and pass a written WNT examination.

Click here to go to AET-Autonomous Navigation Systems (ANS) COOL Snapshot page.

The National Center for Aerospace & Transportation Technologies (NCATT), AET-Autonomous Navigation Systems (ANS) certification is an intermediate-level aerospace technician credential. The ANS certification is recommended for professionals who specialize in autonomous navigation systems. To receive the ANS certification, candidates are required to pass an exam.

Click here to go to General Communications Technician - Level 1 (GCT1) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), General Communications Technician Level 1 (GCT1) certification is an entry-level credential intended for radio communications technicians or engineers. The GCT1 certification is modeled after wide-ranging industry communication systems encompassing more specific detailed items along with the U.S. Department of Homeland Security (DHS) guidelines covering all disciplines in the COMT program. The purpose of the GCT1 is to provide basic certification testing that covers all areas a new radio communications technician or engineer will encounter in the public safety communications, business radio, or commercial radio field. ETA-I does not have minimum training, education, or experience requirements to take the certification exam.

Click here to go to Distributed Antenna Systems Technician (DAS) COOL Snapshot page.

Credential description coming soon.

Click here to go to Basic Electricity and Electronics - Alternating Current (BEE-AC) COOL Snapshot page.

Renewal Period: 3 years

The Basic Electricity and Electronics - Alternating Current (BEE-AC) certification is an entry-level credential designed for technicians in the electricity and electronics field. The exam tests applicant's hands-on troubleshooting skills utilizing a multi-meter, function generator, and oscilloscope along with an electronic trainer and test cards. The certification validates applicant's knowledge of various AC theories, equipment, math, cabling, and other related subjects. Applicants have different options to meet the eligibility requirements, active duty or veteran military personnel whose rating or assignment is/was in the related field meet the eligibility requirement for BEE-AC certification.

Click here to go to Basic Electricity and Electronics - Direct Current (BEE-DC) COOL Snapshot page.

Renewal Period: 3 years

The Basic Electricity and Electronics - Direct Current (BEE-DC) certification is an entry-level credential designed for technicians in the electricity and electronics field. The exam tests applicant's hands-on troubleshooting skills and validates applicant's knowledge of basic electrical theory, magnetism, electrical safety, electronic equipment and components laws, circuits and other related subjects. Applicants have different options to meet the eligibility requirements, active duty or veteran military personnel whose rating or assignment is/was in the related field meet the eligibility requirement for BEE-DC certification.

Click here to go to Basic Electricity and Electronics - Analog (BEE-A) COOL Snapshot page.

Renewal Period: 3 years

The Basic Electricity and Electronics - Analog (BEE-A) certification is an entry-level credential designed for technicians in the electricity and electronics field. The exam tests applicant's hands-on troubleshooting skills and validates applicant's knowledge of various analog components, electronics, power, and other related subjects. Applicants have different options to meet the eligibility requirements, active duty or veteran military personnel whose rating or assignment is/was in the related field meet the eligibility requirement for BEE-A certification.

Click here to go to Basic Electricity and Electronics - Digital (BEE-D) COOL Snapshot page.

Renewal Period: 3 years

The Basic Electricity and Electronics - Digital (BEE-D) certification is an entry-level credential designed for technicians in the electricity and electronics field. The exam tests applicant's hands-on troubleshooting skills and validates applicant's knowledge of various digital electricity and electronics theories, safety precautions, conversions, diagrams, and other related subjects. Applicants have different options to meet the eligibility requirements, active duty or veteran military personnel whose rating or assignment is/was in the related field meet the eligibility requirement for BEE-D certification.

Click here to go to Termination and Testing Technician (TTT) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Termination and Testing Technician (TTT) certification is recommended for mid-career level technicians. TTTs terminate, connect, test, and troubleshoot IP-enabled voice/data/video cable and devices to each other using connectors, tools and techniques specific to fiber optic, copper pairs, and coaxial cabling. Candidates must take and pass a written exam.

Click here to go to Small Wind Installer - Level 1 (SWI-LVL1) COOL Snapshot page.

Credential description coming soon.

Click here to go to RF Interference Mitigation (RFIM) COOL Snapshot page.

Credential description coming soon.

Click here to go to Residential Electronics Systems Integrator Security-Surveillance (RESI-SS) COOL Snapshot page.

Credential description coming soon.

Click here to go to Residential Electronics Systems Integrator Environmental Control (RESI-EC) COOL Snapshot page.

Credential description coming soon.

Click here to go to Residential Electronics Systems Integrator Computer Networking (RESI-CN) COOL Snapshot page.

Credential description coming soon.

Click here to go to Residential Electronics Systems Integrator Closed Circuit TV (RESI-CCTV) COOL Snapshot page.

Credential description coming soon.

Click here to go to Residential Electronics Systems Integrator Audio-Video (RESI-AV) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Residential Electronics Systems Integrator Audio-Video (RESI-AV) is an intermediate-level certification for technicians who install electronics cables in residences and interconnect electronics communications, computer, control or entertainment equipment. Though ETA-I does not require any specific education, training, or experience for the RESI-AV certification, candidates are strongly encouraged to have the requisite knowledge and experience necessary to challenge the exam.

Click here to go to Photovoltaic Installer - Level 1 (PVI-LVL1) COOL Snapshot page.

Credential description coming soon.

Click here to go to Photonics Technician Specialist (PTS) COOL Snapshot page.

The Electronics Technicians Association, International (ETA-I), Photonics Technician Specialist (PTS) certification is an intermediate-level credential for professionals who assemble, measure, test, and repair optical component. PTSs are required to hold Associate of Applied Science (AAS) degrees. PTSs have competencies in laser and optical components and systems; their work involves laboratory research and development; product development, testing and production. PTSs are specialists who work in teams often for original equipment manufacturers (OEMs) of lasers, optics, and photonics components and systems; field service specialists for OEMs or companies that manufacture and utilize lasers, optics, and photonics components and systems.

Click here to go to Photonics Technician Operator (PTO) COOL Snapshot page.

The Electronics Technicians Association, International (ETA-I), Photonics Technician Operator (PTO) certification is an entry-level credential for electronics professionals who assemble, measure, test, and repair optical components. Photonics technicians work on lenses, mirrors, filters, fiber optics, and electro-optic or other photonics devices plus optical sources such as lasers and light-emitting diodes (LEDs). Technicians develop and integrate photonics in enabling technologies—manufacturing and materials processing, Internet and communications, biomedical equipment, and Defense and Homeland Security systems.

Click here to go to Passive Intermodulation Testing (PIM) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Passive Intermodulation Testing (PIM) certification is an intermediate-level technician credential for professionals who install antennae in accordance with the IEC 60237 standard. PIM technicians use testing equipment hardware, connectors, jumpers and related antenna network elements to test antennae and equipment at any frequency range. Though ETA-I does not require specific education, training, or experience for the PIM certification, candidates are strongly encouraged to have the requisite knowledge and experience necessary to challenge the exam.

Click here to go to Mobile Communications and Electronics Installer (MCEI) COOL Snapshot page.

Credential description coming soon.

Click here to go to Master Residential Electronics Systems Integrator (RESIma) COOL Snapshot page.

Credential description coming soon.

Click here to go to General Communications Technician - Level 2 (GCT2) COOL Snapshot page.

The General Communications Technician Level 2 certification is a journeyman level program modeled after wide-ranging industry communication systems encompassing more specific detailed items along with the U.S. Department of Homeland Security (DHS) guidelines covering all the disciplines in the COMT program. The purpose of the GCT2 is to provide a certification program and that expands upon the coverage included in the GCT1 competencies. The GCT2 certification technician candidate must hold the GCT1 or the Associate CETa as the minimum pre-requisite certification. Prior RF experience is highly recommended.

Click here to go to Gaming and Vending Technician (GVT) COOL Snapshot page.

The ETA-i Gaming and Vending Technician (GVT) certification an entry-level credential for technicians with a sound background in electronics. GVTs work in the field to troubleshoot, repair and calibrate gaming and vending type equipment. Money handling, basic electrical, circuitry, computer hardware and software, and safety are topics included in this certification.

Click here to go to Electric Vehicle Technician (EVT) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Electric Vehicle Technician (EVT) is an intermediate-level credential for professionals who work on vehicles powered solely by electricity and perform routine maintenance. Electric Vehicle Technicians must have extensive knowledge of how lithium-ion batteries and automotive systems interact and how to replace hydraulically assisted systems with electric–powered systems, such as power-steering pumps or air-conditioning compressors, to improve fuel economy. Though ETA-I does not require any specific training, education or experience to earn the EVT certification, candidates are strongly encouraged to have the requisite knowledge and experience necessary to challenge the exam.

Click here to go to Commercial Audio Technician (CAT) COOL Snapshot page.

Credential description coming soon.

Click here to go to Certified Satellite Installer S-MATV (CSI-SMATV) COOL Snapshot page.

Credential description coming soon.

Click here to go to Certified Satellite Installer Commercial (CSI-COM) COOL Snapshot page.

Credential description coming soon.

Click here to go to Certified Satellite Installer C and KU band (CSI-C/KU) COOL Snapshot page.

Credential description coming soon.

Click here to go to Certified Satellite Installer Antenna (CSI-A) COOL Snapshot page.

Credential description coming soon.

Click here to go to Electronics Associate DC (EM1) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate DC (EM1) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of various electrical and electronics concepts, electronic measurement equipment, electronic components, circuitry, and other related subjects specific to direct current (DC) electronics. The EM1 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.

Click here to go to Electronics Associate AC (EM2) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate AC (EM2) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of AC, safety, cabling, and other procedures. The EM2 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.

Click here to go to Electronics Associate Analog (EM3) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate Analog (EM3) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of diodes, transistors, thyristors, integrated circuits, optoelectronic devices, power supplies, basic test equipment and measurements, mathematics and formulas, amplifiers, and other related subjects. The EM3 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.

Click here to go to Electronics Associate Digital (EM4) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate Digital (EM4) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of various digital electricity and electronics concepts, numbering systems and conversions, and other related subjects. The EM4 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.

Click here to go to Electronics Associate Comprehensive (EM5) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate Comprehensive (EM5) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of soldering, desoldering, tools, electrical conductors, AC power distribution, circuit protection, circuit controls, generators, motors, interfacing of electronics products, and technician work procedures. The EM5 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.

Click here to go to TRN Wireless Communications Technician (TRN) COOL Snapshot page.

Credential description coming soon.

Click here to go to Fiber To The Antenna (FTTA) COOL Snapshot page.

The ETA-I Fiber To The Antenna (FTTA) is a mid-level fiber optic technician credential. The FTTA standalone certification is for individuals who have been trained in the practice of installing fiber optic cabling at wireless and cellular facilities. FTTAs possess training and experience required to safely and competently install pre-terminated fiber optic transmission cable assemblies and connection devices onto equipment and antenna(s), wherever the antenna system may be located. Skills that FTTAs demonstrate include inspecting, cleaning and testing fiber plant as well as identifying and troubleshooting during and after installation.

Click here to go to Source Inspector Electrical Equipment (SIEE) COOL Snapshot page.

Renewal Period: 3 years

The American Petroleum Institute (API), Source Inspector Electrical Equipment (SIEE) is a mid-level certification designed for individuals who perform tasks relating to the quality surveillance of materials, equipment and fabrications at the supplier/vendor level in the oil, petrochemical and gas industries. SIEEs act on behalf of purchasers to examine fabricated and manufactured equipment and materials at a supplier's facility, as well as confirm that the supplier's quality management system is being utilized effectively. Candidates for the SIEE must meet educational and experience requirements and must pass a written exam.

Click here to go to Mobile Electronics Certified Professional - Advance COOL Snapshot page.

Credential description coming soon.

Click here to go to Mobile Electronics Certified Professional - Master COOL Snapshot page.

Credential description coming soon.

In Demand

This certification is considered in demand

GI Bill®

Reimbursement for exam fees has been approved for payment through the GI Bill. Click for external link to GI Bill licensing and certification information.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click here to go to the GI Bill site.

ANSI

This credential has been accredited by ANSI. Click for external link to the ANSI web site.

ICAC

This credential has been accredited by ICAC. Click for external link to the ICAC web site.

NCCA

This credentialing program has been accredited by NCCA. Click for external link to the NCCA web site.

ABSNC

This credential has been accredited by ABSNC. Click for external link to the ABSNC web site.

IAS

This credential has been accredited by IAS. Click for external link to the IAS web site.

Some

Credential is related to some tasks associated with the duties of the rating (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the rating (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater)
Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%)
Bright Outlook – new job opportunities are very likely in the future for this job
Registered Apprenticeship
Click here for the external link to: My Next Move for Veterans - Aerospace Engineering and Operations Technicians
Click here for the external link to: My Next Move salary info for Aerospace Engineering and Operations Technicians
Click here for the external link to: My Next Move for Veterans - Avionics Technicians
Click here for the external link to: My Next Move salary info for Avionics Technicians
Click here for the external link to: My Next Move for Veterans - Computer, Automated Teller, and Office Machine Repairers
Click here for the external link to: My Next Move salary info for Computer, Automated Teller, and Office Machine Repairers
Click here for the external link to: My Next Move for Veterans - Electrical and Electronic Equipment Assemblers
Click here for the external link to: My Next Move salary info for Electrical and Electronic Equipment Assemblers
Click here for the external link to: My Next Move for Veterans - Electrical and Electronics Installers and Repairers, Transportation Equipment
Click here for the external link to: My Next Move salary info for Electrical and Electronics Installers and Repairers, Transportation Equipment
Click here for the external link to: My Next Move for Veterans - Electrical and Electronics Repairers, Commercial and Industrial Equipment
Click here for the external link to: My Next Move salary info for Electrical and Electronics Repairers, Commercial and Industrial Equipment
Click here for the external link to: My Next Move for Veterans - Electrical Engineering Technicians
Click here for the external link to: My Next Move salary info for Electrical Engineering Technicians
Click here for the external link to: My Next Move for Veterans - Electro-Mechanical Technicians
Click here for the external link to: My Next Move salary info for Electro-Mechanical Technicians
Click here for the external link to: My Next Move for Veterans - Electromechanical Engineering Technologists
Click here for the external link to: My Next Move salary info for Electromechanical Engineering Technologists
Click here for the external link to: My Next Move for Veterans - Electromechanical Equipment Assemblers
Click here for the external link to: My Next Move salary info for Electromechanical Equipment Assemblers
Click here for the external link to: My Next Move for Veterans - Electronic Drafters
Click here for the external link to: My Next Move salary info for Electronic Drafters
Click here for the external link to: My Next Move for Veterans - Electronic Equipment Installers and Repairers, Motor Vehicles
Click here for the external link to: My Next Move salary info for Electronic Equipment Installers and Repairers, Motor Vehicles
Click here for the external link to: My Next Move for Veterans - Electronic Home Entertainment Equipment Installers and Repairers
Click here for the external link to: My Next Move salary info for Electronic Home Entertainment Equipment Installers and Repairers
Click here for the external link to: My Next Move for Veterans - Electronics Engineering Technicians
Click here for the external link to: My Next Move salary info for Electronics Engineering Technicians
Click here for the external link to: My Next Move for Veterans - Inspectors, Testers, Sorters, Samplers, and Weighers
Click here for the external link to: My Next Move salary info for Inspectors, Testers, Sorters, Samplers, and Weighers
Click here for the external link to: My Next Move for Veterans - Mechanical Engineering Technicians
Click here for the external link to: My Next Move salary info for Mechanical Engineering Technicians
Click here for the external link to: My Next Move for Veterans - Medical Equipment Repairers
Click here for the external link to: My Next Move salary info for Medical Equipment Repairers
Click here for the external link to: My Next Move for Veterans - Photonics Technicians
Click here for the external link to: My Next Move salary info for Photonics Technicians
Click here for the external link to: My Next Move for Veterans - Radio Mechanics
Click here for the external link to: My Next Move salary info for Radio Mechanics
Click here for the external link to: My Next Move for Veterans - Radio, Cellular, and Tower Equipment Installers and Repairers
Click here for the external link to: My Next Move salary info for Radio, Cellular, and Tower Equipment Installers and Repairers
Click here for the external link to: My Next Move for Veterans - Robotics Technicians
Click here for the external link to: My Next Move salary info for Robotics Technicians
Click here for the external link to: My Next Move for Veterans - Security and Fire Alarm Systems Installers
Click here for the external link to: My Next Move salary info for Security and Fire Alarm Systems Installers
Click here for the external link to: My Next Move for Veterans - Telecommunications Equipment Installers and Repairers, Except Line Installers
Click here for the external link to: My Next Move salary info for Telecommunications Equipment Installers and Repairers, Except Line Installers