DOD Civilian COOL Summary - 5352 - Industrial Equipment Mechanic

Civilian Job	Duties Matched	Bright Outlook	Registered Apprenticeship	Local Salary Info
Aircraft Mechanics and Service Technicians	Some		Apprenticeship	find local salary
Control and Valve Installers and Repairers, Except Mechanical Door	Most		Apprenticeship	find local salary
Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic	Some			find local salary
Electrical and Electronics Repairers, Commercial and Industrial Equipment	Most		Apprenticeship	find local salary
Electro-Mechanical Technicians	Some		Apprenticeship	find local salary
Electromechanical Equipment Assemblers	Some		Apprenticeship	find local salary
Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic	Some		Apprenticeship	find local salary
Industrial Machinery Mechanics	Most		Apprenticeship	find local salary
Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic	Some		Apprenticeship	find local salary
Machinists	Some		Apprenticeship	find local salary
Maintenance Workers, Machinery	Most		Apprenticeship	find local salary
Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic	Some		Apprenticeship	find local salary
Millwrights	Some	Bright Outlook	Apprenticeship	find local salary
Mobile Heavy Equipment Mechanics, Except Engines	Most		Apprenticeship	find local salary
Security and Fire Alarm Systems Installers	Some	Bright Outlook	Apprenticeship	find local salary

Click here to go to Certified Electronics Technician - Journeyman-Level - Industrial COOL Snapshot page.

Renewal Period: 2 years

Certified Electronics Technician - Journeyman-Level - Industrial. This is an entry-level certification exam. Technicians working in this field will have knowledge in the following areas; characteristics and applications of industrial electronics components, the operation of devices such as triacs, SCRs, diacs, and Shockley diodes. Also covered are various kinds of transducers, operation of transistors and op-amps, single-phase and three-phase control systems, motors, PLCs and industrial electronics safety and basic knowledge of hydraulic and pneumatic systems. Applicants must pass a written exam.

Click here to go to Mechanic (Powerplant) COOL Snapshot page.

Renewal Period: Lifetime

Mechanic (Power Plant) This is a mid-level certification and requires years of training and experience to perform. Power plant mechanics are authorized to work on engines and do limited work on propellers. Mechanics work in hangars, repair stations, or out on the airfield on the "flight lines" where aircraft park. Mechanics often work under time pressure to maintain flight schedules or, in general aviation, to keep from inconveniencing customers. At the same time, mechanics have a tremendous responsibility to maintain safety standards, and this can cause the job to be stressful.

Click here to go to Fluid Power Connector and Conductor (CC) COOL Snapshot page.

Renewal Period: 5 years

The International Fluid Power Society (IFPS), Fluid Power Connector and Conductor (CC) certification is for professionals in the fluid power and motion control industry who fabricate, assemble, and test hose and assemblies. To earn the CC certification, candidates must pass a written exam and a job performance exam.

Click here to go to Industrial Hydraulic Mechanic (IHM) COOL Snapshot page.

Renewal Period: 5 years

The International Fluid Power Society (IFPS), Industrial Hydraulic Mechanic (IHM) certification is for professionals in the fluid power and motion control industry who fabricate, assemble, test, maintain, and repair systems and components. IHMs understand hydraulic symbols, read system schematics, and are skilled in using hand tools, power tools, micrometers, and testing equipment. To earn the IHM certification, candidates must pass a written exam and a job performance exam.

Click here to go to Industrial Hydraulic Technician (IHT) COOL Snapshot page.

Renewal Period: 5 years

The International Fluid Power Society (IFPS), Industrial Hydraulic Technician (IHT) certification is for professionals in the fluid power and motion control industry who troubleshoot, test, modify systems, and prepare reports. IHTs apply fluid power theory and related knowledge to test and troubleshoot operational industrial hydraulic systems and applications. IHTs also read industrial application schematics, perform basic cylinder and hydraulic motor calculations, and supervise system installations and commissioning. To earn the IHT certification, candidates must pass a written exam and a job performance exam.

Click here to go to Pneumatic Mechanic (PM) COOL Snapshot page.

Renewal Period: 5 years

The International Fluid Power Society (IFPS), Pneumatic Mechanic (PM) certification is for professionals in the fluid power and motion control industry who fabricate, assemble, test, maintain, and repair systems and components. PMs understand hydraulic symbols, read system schematics, and are skilled in using hand tools, power tools, micrometers, and testing equipment. To earn the PM certification, candidates must pass a written exam and a job performance exam.

Click here to go to Pneumatic Specialist (PS) COOL Snapshot page.

Renewal Period: 5 years

The International Fluid Power Society (IFPS), Pneumatic Specialist (PS) is for professionals in the fluid power and motion control industry who analyze and design systems, select components, and instruct others in operations and maintenance. To earn the PS certification, candidates must pass a written exam.

Click here to go to Pneumatic Technician (PT) COOL Snapshot page.

Renewal Period: 5 years

The International Fluid Power Society (IFPS), Pneumatic Technician (PT) certification is for professionals in the fluid power and motion control industry who troubleshoot, test, modify systems, and prepare reports. PTs fabricate, assemble, service, maintain and test pneumatic equipment. PTs also calculate force and motion control systems and follow blueprints and schematics with ISO standard pneumatic symbols. To earn the PT certification, candidates must pass a written exam and a job performance exam.

Click here to go to Certified Control Systems Technician - Level I (CCST-I) COOL Snapshot page.

Renewal Period: 3 years

ISA's Certified Control Systems Technician Program (CCST) offers third-party recognition of technicians' knowledge and skills in automation and control. CCSTs calibrate, document, troubleshoot, and repair/replace instrumentation for systems that measure and control level, temperature, pressure, flow, and other process variables. CCST certifications are available at three levels, and each level requires the successful completion of an examination. The CCST examination is only one requirement for certification. The candidate must also meet minimum requirements comprised of work experience and education.

Click here to go to Certified Equipment Manager COOL Snapshot page.

The Association of Equipment Management Professionals, Certified Equipment Manager (CEM) is a professional credential for managers of off-road heavy equipment fleets or managers of municipal government fleets. Equipment managers with five years or more of experience who meet the CEM requisites may apply by completing the CEM application.

Click here to go to Certified Calibration Technician (CCT) COOL Snapshot page.

Renewal Period: 3 years

The Certified Calibration Technician (CCT) tests, calibrates, maintains and repairs electrical, mechanical, electromechanical, analytical and electronic measuring, recording and indicating instruments and equipment for conformance to established standards. Candidate must have five years of on-the-job experience in one or more of the areas of the Certified Calibration Technician Body of Knowledge (If the candidate has completed a degree from a college, university, or technical school with accreditation accepted by ASQ, part of the five-year experience requirement will be waived). Candidate must pass a written examination.

Click here to go to Machining Level I - Measurement, Materials, and Safety Skills COOL Snapshot page.

The Machining Level I - Measurement, Materials, and Safety Skills certification is an entry-level machinist credential. Applicants are not required to have any minimal education, experience or training, however passing the exam is required.

Click here to go to Machining Level I - Job Planning, Benchwork, & Layout Skills COOL Snapshot page.

The National Institute for Metalworking Skills, Inc (NIMS), Machining Level I certification is an entry-level machinist credential. Level I credentials identify and recognize machinists with the requisite skills required of a machinist who can perform machining tasks that involve job planning, benchwork, and layout work. Earning a NIMS certification requires the successful completion of both a performance assessment and a written examination. The performance assessment includes manufacturing a part, setting-up and operating a machine, and writing a program.

Click here to go to Machining Level I - Drill Press Skills I COOL Snapshot page.

The Machining Level 1 certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Measurement, Materials, and Safety, Vertical Milling, Drill Press, Surface Grinding, Turning – Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance assessment and written examination. The performance assessment will include the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part. There is only one project for the candidate to complete for each Machining Level I skill area. Some skill areas encompass two or more performance requirements. One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).

Click here to go to Certified Maintenance and Reliability Professionals (CMRP) COOL Snapshot page.

Renewal Period: 3 years

Certified Maintenance and Reliability Professionals (CMRP) is an entry-level certification. The Certified Maintenance & Reliability Professional (CMRP) program is designed for certifying the knowledge, skills and experience of M&R professionals. It's more than just committing textbooks to memory; it's a thorough examination of individual expertise measured against a universal standard. It was developed to assess professionals' aptitude within the five (5) pillars of the Maintenance and Reliability Body of Knowledge: Business Management, Equipment Reliability, Manufacturing Process Reliability, Organization and Leadership, and Work Management. There are no educational or experiential requirements to sit for the exam.

Click here to go to Certified Maintenance and Reliability Technician (CMRT) COOL Snapshot page.

Renewal Period: 3 years

The Certified Maintenance and Reliability Technician (CMRT) is an entry-level certification. CMRT will provide a non-biased, third-party, objective assessment and confirmation of the skills of your industrial maintenance mechanics. CMRT's are responsible for preventive, predictive, and corrective maintenance. They perform troubleshooting and analysis, and apply sound maintenance practices in all aspects of their work. CMRTs are multi-skilled individuals whose expertise is primarily mechanical in nature as opposed to instrumentation or electrical. The CMRT exam tests competency and knowledge of specific tasks within four (4) domains: Maintenance Practices, Preventative and Predictive Maintenance, Troubleshooting and Analysis, and Corrective Maintenance. There are no specific education or experience requirements to sit for the exam.

Click here to go to Level I Machine Lubrication Technician (MLT I) COOL Snapshot page.

Credential description coming soon.

Click here to go to Certified Aerospace Technician Core COOL Snapshot page.

Renewal Period: 3 years

SpaceTEC, Certified Aerospace Technician Core is an entry-level certification that covers general knowledge in the areas of introduction to aerospace, applied mechanics, basic electricity, test and measurements, materials and processes, and aerospace safety. To earn the Certified Aerospace Technician Core certification, applicants must meet at least one of the eligibility criteria and pass both a written exam and a practical exam. Applicants who do not receive a satisfactory score on the written exam will also be required to pass an oral exam.

Click here to go to Machine Maintenance Service and Repair Level II - Preventive Maintenance II COOL Snapshot page.

The National Institute for Metalworking Skills (NIMS) credentials are earned by students, trainees, apprentices, employees, and military personnel. By earning NIMS credentials, these individuals demonstrate that their skills meet industry established standards.

Click here to go to Machine Maintenance Service and Repair Level III - Machine Service and Repair III COOL Snapshot page.

The National Institute for Metalworking Skills (NIMS) credentials are earned by students, trainees, apprentices, employees, and military personnel. By earning NIMS credentials, these individuals demonstrate that their skills meet industry established standards.

Click here to go to Machine Maintenance Service and Repair Level III - Machine Repair/Rebuilding III COOL Snapshot page.

The National Institute for Metalworking Skills (NIMS) credentials are earned by students, trainees, apprentices, employees, and military personnel. By earning NIMS credentials, these individuals demonstrate that their skills meet industry established standards.

Click here to go to Machining Level I - Manual Milling Skills I COOL Snapshot page.

The Machining Level 1 certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Measurement, Materials, and Safety, Vertical Milling, Drill Press, Surface Grinding, Turning – Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance assessment and written examination. The performance assessment will include the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part. There is only one project for the candidate to complete for each Machining Level I skill area. Some skill areas encompass two or more performance requirements. One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).

Click here to go to Machining Level I - Turning Operations: Turning Chucking Skills COOL Snapshot page.

The Machining Level 1 certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Measurement, Materials, and Safety, Vertical Milling, Drill Press, Surface Grinding, Turning – Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance assessment and written examination. The performance assessment will include the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part. There is only one project for the candidate to complete for each Machining Level I skill area. Some skill areas encompass two or more performance requirements. One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).

Click here to go to Machining Level I - Turning Operations: Turning Between Centers COOL Snapshot page.

The Machining Level I certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Vertical Milling, Drill Press, Surface Grinding, Turning - Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance and written examination. The performance exam will be the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part. There are performance assessment requirements for all skill cluster areas except Measurement, Materials, & Safety Skills. One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).

Click here to go to Machining Level I - Grinding Skills I COOL Snapshot page.

The Machining Level 1 certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Measurement, Materials, and Safety, Vertical Milling, Drill Press, Surface Grinding, Turning – Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance assessment and written examination. The performance assessment will include the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part. There is only one project for the candidate to complete for each Machining Level I skill area. Some skill areas encompass two or more performance requirements. One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).

Click here to go to Machining Level I - CNC Turning: Programming Setup & Operations COOL Snapshot page.

Renewal Period: Lifetime

The Machining Level 1 certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Measurement, Materials, and Safety, Vertical Milling, Drill Press, Surface Grinding, Turning – Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance assessment and written examination. The performance assessment will include the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part. There is only one project for the candidate to complete for each Machining Level I skill area. Some skill areas encompass two or more performance requirements. One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).

Click here to go to Machining Level I - CNC Milling: Programming Setup & Operations COOL Snapshot page.

Renewal Period: Lifetime

The NIMS Machining Level I - CNC Milling: Programming Setup & Operations certification is an entry-level machinist certification. Achieving a NIMS credential is a means through which an individual involved or interested in metalforming can prove their abilities to themselves, to their instructors or employers and to the customer.

Click here to go to Machining Level I - CNC Turning: Operations COOL Snapshot page.

The Machining Level 1 certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Measurement, Materials, and Safety, Vertical Milling, Drill Press, Surface Grinding, Turning – Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance assessment and written examination. The performance assessment will include the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part. There is only one project for the candidate to complete for each Machining Level I skill area. Some skill areas encompass two or more performance requirements. One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).

Click here to go to Machining Level I - CNC Milling: Operations COOL Snapshot page.

The NIMS Machining Level I - CNC Milling: Operations certification is an entry-level machinist certification. Achieving a NIMS credential is a means through which an individual involved or interested in CNC milling can prove their abilities to themselves, to their instructors or employers and to the customer.

Click here to go to Pre-engineered Industrial Fire Extinguishing System Technician - FN COOL Snapshot page.

Credential description coming soon.

Click here to go to Fire Protection: Fire Alarm Systems - Level II COOL Snapshot page.

Renewal Period: 3 years

The Fire Protection: Fire Alarm Systems - Level II credential is designed for mid-level engineering technicians working in the fire alarm industry who engage in a combination of the following fire alarm systems activities: system layout (plan preparation), system equipment selection, system installation, system acceptance testing, system trouble-shooting, system servicing, and system technical sales. Candidates must have a minimum of two years of fire detection and signaling systems experience, which must cover at least 12 months of fire alarm systems experience, including alarm and detection, notification, sprinkler monitoring, and interfaces and controls for agent releasing suppression systems (either agent or water-based systems). The Fire Protection: Fire Alarm Systems program comprises four levels of certification. Candidates must meet the minimum eligibility requirements for both Level I and Level II Fire Alarm Systems credentials and pass those written exams. This certification also requires a Supervisor's verification of all work elements used to meet the candidate application requirements. Candidate must pass a written examination.

Click here to go to Fire Protection: Fire Alarm Systems - Level I COOL Snapshot page.

Renewal Period: 3 years

The Fire Protection: Fire Alarm Systems - Level I credential is designed for trainees and entry-level engineering technicians working in the fire alarm industry who engage in a combination of the following fire alarm systems activities: system layout (plan preparation), system equipment selection, system installation, system acceptance testing, system trouble-shooting, system servicing, and system technical sales. Candidates must have a minimum of 3 months of technical experience with fire detection and signaling systems. The Fire Protection: Fire Alarm Systems program comprises four levels of certification. This certification also requires a Supervisor's verification of all work elements used to meet the candidate application requirement. Candidate must pass a written examination.

Click here to go to Fire Protection: Fire Alarm Systems - Level III COOL Snapshot page.

Renewal Period: 3 years

The Fire Protection: Fire Alarm Systems - Level III credential is designed for advanced mid-level engineering technicians working in the fire alarm industry who engage in a combination of the following fire alarm systems activities: system layout (plan preparation), system equipment selection, system installation, system acceptance testing, system trouble-shooting, system servicing, and system technical sales. The Fire Protection: Fire Alarm Systems program comprises four levels of certification. Candidates must meet the minimum eligibility requirements for the Level I, II, and III Fire Alarm Systems and pass those written exams. This certification also requires a Supervisor's verification of all work elements used to meet the candidate application requirement. Candidates must have a minimum of five years in the field of fire detection and signaling system.

Click here to go to Fire Protection: Fire Alarm Systems - Level IV COOL Snapshot page.

Renewal Period: 3 years

The Fire Protection: Fire Alarm Systems - Level IV credential is designed for senior engineering technicians working in the fire alarm industry who engage in a combination of the following fire alarm systems activities: system layout (plan preparation), system equipment selection, system installation, system acceptance testing, system trouble-shooting, system servicing, and system technical sales. Candidates must meet the Level I, II, III, and IV minimum eligibility requirements and pass those written exams. Candidates must have a minimum of 10 years in the field of fire detection and signaling system.

Click here to go to Fire Protection: Inspection and Testing of Water-Based Systems - Level I COOL Snapshot page.

Credential description coming soon.

Click here to go to Fire Protection: Inspection and Testing of Water-Based Systems - Level II COOL Snapshot page.

The National Institute for Certification in Engineering Technologies (NICET), Fire Protection: Inspection and Testing of Water-Based Systems - Level II certification is for engineering technicians engaged in the inspection and testing of existing water-based fire protection systems, including identifying and addressing emergency and pre-planned impairments. Level II Technicians perform routine inspection and testing tasks under general daily supervision. Fire Protection: Inspection and Testing of Water-Based Systems - Level II candidates must obtain supervisor verification of all performance measures for Levels I and II and meet a work experience requirement. Level II certification does not require prior certification at the lower level, but it does require that the certification requirements of the lower level have been met. Candidates must also pass a combination of written exams.

Click here to go to Fire Protection: Inspection and Testing of Water-Based Systems - Level III COOL Snapshot page.

Credential description coming soon.

Click here to go to Fire Protection: Special Hazards Suppression Systems - Level I COOL Snapshot page.

Credential description coming soon.

Click here to go to Fire Protection: Special Hazards Suppression Systems - Level II COOL Snapshot page.

Credential description coming soon.

Click here to go to Fire Protection: Special Hazards Suppression Systems - Level III COOL Snapshot page.

Credential description coming soon.

Click here to go to Fire Protection: Special Hazards Suppression Systems - Level IV COOL Snapshot page.

Credential description coming soon.

Click here to go to Certified Vibration Analyst - Category I COOL Snapshot page.

Renewal Period: 5 years

The Vibration Institute, Certified Vibration Analyst - Category I is an entry-level credential for professionals who specialize in machine and equipment maintenance, troubleshooting, and engineering. Vibration Analysts certified at the first level perform a range of single channel machinery vibration condition monitoring and diagnostic activities. This activity may include acquiring data on predetermined routes, testing machinery for predefined procedures, and reading comparisons alert settings. Applicants for the Category I Certified Vibration Analyst certification must meet training and experience requirements and are also required to pass an exam.

Click here to go to Certified Control Systems Technician - Level II (CCST-II) COOL Snapshot page.

Renewal Period: 3 years

ISA's Certified Control Systems Technician Program (CCST) offers third-party recognition of technicians' knowledge and skills in automation and control. CCSTs calibrate, document, troubleshoot, and repair/replace instrumentation for systems that measure and control level, temperature, pressure, flow, and other process variables. CCST certifications are available at three levels, and each level requires the successful completion of an examination. The CCST examination is only one requirement for certification. The candidate must also meet minimum requirements comprised of work experience and education.

Click here to go to Certified Control Systems Technician - Level III (CCST-III) COOL Snapshot page.

Renewal Period: 3 years

ISA's Certified Control Systems Technician Program (CCST) offers third-party recognition of technicians' knowledge and skills in automation and control. CCSTs calibrate, document, troubleshoot, and repair/replace instrumentation for systems that measure and control level, temperature, pressure, flow, and other process variables. CCST certifications are available at three levels, and each level requires the successful completion of an examination. To qualify to sit for the CCST examination, the candidate must have a minimum of 13 years of combined education, training, and/or experience.

Click here to go to Certified Vibration Analyst - Category III COOL Snapshot page.

Renewal Period: 5 years

The Vibration Institute, Certified Vibration Analyst - Category III is an advanced intermediate-level credential for professionals who specialize in machine and equipment maintenance, troubleshooting, and engineering. Certified Vibration Analysts certified at the third level establish, direct, and perform programs for condition monitoring and diagnostics of machines including spectral, waveform, and orbit analysis. Category III Certified Vibration Analysts perform minor corrective actions involving operating deflection shapes, single-plane balancing, and diagnostic testing. Applicants for the Category III Certified Vibration Analyst must hold certification at category I and II, meet education, training and experience requirements and are also required to pass an exam.

Click here to go to Certified Vibration Analyst - Category II COOL Snapshot page.

Renewal Period: 5 years

The Vibration Institute, Certified Vibration Analyst - Category II is an intermediate-level credential for professionals who specialize in machine and equipment maintenance, troubleshooting, and engineering. Vibration Analysts certified at the second level perform basic vibration analysis using single-channel instruments according to established procedures, set-up instruments, and maintain a database of results. Applicants for the Category II Certified Vibration Analyst certification must meet training and experience requirements and are also required to pass an exam.

Click here to go to Certified Vibration Analyst - Category IV COOL Snapshot page.

Renewal Period: 5 years

The Vibration Institute, Certified Vibration Analyst - Category IV is an advanced level credential for professionals who specialize in machine and equipment maintenance, troubleshooting, and engineering. Category IV Certified Vibration Analysts direct condition monitoring programs, perform major diagnostic efforts, and perform and recommend corrective actions and design modifications. These are Individuals who understand the theory of mechanical vibrations, advanced vibration analysis techniques and signal analysis. Applicants for the Category IV Certified Vibration Analyst must hold certification at the category III level, meet education, training and experience requirements, and are also required to pass an exam.

Click here to go to Certified Balancing Specialist - Category I COOL Snapshot page.

Renewal Period: 5 years

The Vibration Institute, Certified Balancing Specialist - Category I is an entry-level credential for professionals who adjust machinery. The Certified Balancing Specialist credential validates an individual's knowledge of the basics of balancing, vibration testing and analysis, and balancing techniques. Individuals seeking certification as a Balancing Specialist are required to understand basic shop and field balancing concepts, and be able to perform vibration analysis, conduct single-plane balancing, calculate balance sensitivity and phase lag, and evaluate balance results against ISO balancing standards. Applicants are required to meet experience and training requirements and must pass an exam.

In Demand

This certification is considered in demand

GI Bill^®

Reimbursement for exam fees has been approved for payment through the GI Bill. Click for external link to GI Bill licensing and certification information.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click here to go to the GI Bill site.

ANSI

This credential has been accredited by ANSI. Click for external link to the ANSI web site.

ICAC

This credential has been accredited by ICAC. Click for external link to the ICAC web site.

NCCA

This credentialing program has been accredited by NCCA. Click for external link to the NCCA web site.

ABSNC

This credential has been accredited by ABSNC. Click for external link to the ABSNC web site.

IAS

This credential has been accredited by IAS. Click for external link to the IAS web site.

Some

Credential is related to some tasks associated with the duties of the rating (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the rating (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater)

Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%)

Bright Outlook – new job opportunities are very likely in the future for this job

Registered Apprenticeship

Click here for the external link to: My Next Move for Veterans - Aircraft Mechanics and Service Technicians

Click here for the external link to: My Next Move salary info for Aircraft Mechanics and Service Technicians

Click here for the external link to: My Next Move for Veterans - Control and Valve Installers and Repairers, Except Mechanical Door

Click here for the external link to: My Next Move salary info for Control and Valve Installers and Repairers, Except Mechanical Door

Click here for the external link to: My Next Move for Veterans - Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Click here for the external link to: My Next Move salary info for Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Click here for the external link to: My Next Move for Veterans - Electrical and Electronics Repairers, Commercial and Industrial Equipment

Click here for the external link to: My Next Move salary info for Electrical and Electronics Repairers, Commercial and Industrial Equipment

Click here for the external link to: My Next Move for Veterans - Electro-Mechanical Technicians

Click here for the external link to: My Next Move salary info for Electro-Mechanical Technicians

Click here for the external link to: My Next Move for Veterans - Electromechanical Equipment Assemblers

Click here for the external link to: My Next Move salary info for Electromechanical Equipment Assemblers

Click here for the external link to: My Next Move for Veterans - Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Click here for the external link to: My Next Move salary info for Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Click here for the external link to: My Next Move for Veterans - Industrial Machinery Mechanics

Click here for the external link to: My Next Move salary info for Industrial Machinery Mechanics

Click here for the external link to: My Next Move for Veterans - Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Click here for the external link to: My Next Move salary info for Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Click here for the external link to: My Next Move for Veterans - Machinists

Click here for the external link to: My Next Move salary info for Machinists

Click here for the external link to: My Next Move for Veterans - Maintenance Workers, Machinery

Click here for the external link to: My Next Move salary info for Maintenance Workers, Machinery

Click here for the external link to: My Next Move for Veterans - Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Click here for the external link to: My Next Move salary info for Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

Click here for the external link to: My Next Move for Veterans - Millwrights

Click here for the external link to: My Next Move salary info for Millwrights

Click here for the external link to: My Next Move for Veterans - Mobile Heavy Equipment Mechanics, Except Engines

Click here for the external link to: My Next Move salary info for Mobile Heavy Equipment Mechanics, Except Engines

Click here for the external link to: My Next Move for Veterans - Security and Fire Alarm Systems Installers

Click here for the external link to: My Next Move salary info for Security and Fire Alarm Systems Installers

5352 - Industrial Equipment Mechanic

Federal Occupation Description

Federal Occupation Description

Other Federal Occupations

In Demand

GI Bill^®

ANSI

ICAC

NCCA

ABSNC

IAS

Some

Most

Other

Credential	Agency	Related As	GI Bill^®	Accreditation
Certified Electronics Technician - Journeyman-Level - Industrial Is Not In Demand	International Society of Certified Electronics Technicians (ISCET)	Some	GI Bill
Mechanic (Powerplant) Is Not In Demand	Federal Aviation Administration (FAA)	Some	GI Bill
Fluid Power Connector and Conductor (CC) Is Not In Demand	International Fluid Power Society (IFPS)	Some
Industrial Hydraulic Mechanic (IHM) Is Not In Demand	International Fluid Power Society (IFPS)	Most	GI Bill
Industrial Hydraulic Technician (IHT) Is Not In Demand	International Fluid Power Society (IFPS)	Most	GI Bill
Pneumatic Mechanic (PM) Is Not In Demand	International Fluid Power Society (IFPS)	Most	GI Bill
Pneumatic Specialist (PS) Is Not In Demand	International Fluid Power Society (IFPS)	Some	GI Bill
Pneumatic Technician (PT) Is Not In Demand	International Fluid Power Society (IFPS)	Most	GI Bill
Certified Control Systems Technician - Level I (CCST-I) Is Not In Demand	International Society of Automation (ISA)	Most
Certified Equipment Manager Is Not In Demand	Association of Equipment Management Professionals	Some
Certified Calibration Technician (CCT) Is Not In Demand	American Society for Quality (ASQ)	Most	GI Bill
Machining Level I - Measurement, Materials, and Safety Skills Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Some	GI Bill
Machining Level I - Job Planning, Benchwork, & Layout Skills Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Some	GI Bill
Machining Level I - Drill Press Skills I Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Some	GI Bill
Certified Maintenance and Reliability Professionals (CMRP) Is In Demand	Society for Maintenance and Reliability Professionals (SMRP)	Some	GI Bill	Accreditation
Certified Maintenance and Reliability Technician (CMRT) Is Not In Demand	Society for Maintenance and Reliability Professionals (SMRP)	Most
Level I Machine Lubrication Technician (MLT I) Is Not In Demand	International Council for Machinery Lubrication (ICML)	Most
Certified Aerospace Technician Core Is Not In Demand	SpaceTEC	Some	GI Bill	Accreditation
Machine Maintenance Service and Repair Level II - Preventive Maintenance II Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Most
Machine Maintenance Service and Repair Level III - Machine Service and Repair III Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Most
Machine Maintenance Service and Repair Level III - Machine Repair/Rebuilding III Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Some
Machining Level I - Manual Milling Skills I Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Some	GI Bill
Machining Level I - Turning Operations: Turning Chucking Skills Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Some	GI Bill
Machining Level I - Turning Operations: Turning Between Centers Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Some	GI Bill
Machining Level I - Grinding Skills I Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Some	GI Bill
Machining Level I - CNC Turning: Programming Setup & Operations Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Some	GI Bill
Machining Level I - CNC Milling: Programming Setup & Operations Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Some	GI Bill
Machining Level I - CNC Turning: Operations Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Some	GI Bill
Machining Level I - CNC Milling: Operations Is Not In Demand	National Institute for Metalworking Skills, Inc (NIMS)	Some	GI Bill
Pre-engineered Industrial Fire Extinguishing System Technician - FN Is Not In Demand	International Code Council (ICC)	Most
Fire Protection: Fire Alarm Systems - Level II Is Not In Demand	National Institute for Certification in Engineering Technologies (NICET)	Some
Fire Protection: Fire Alarm Systems - Level I Is Not In Demand	National Institute for Certification in Engineering Technologies (NICET)	Most
Fire Protection: Fire Alarm Systems - Level III Is Not In Demand	National Institute for Certification in Engineering Technologies (NICET)	Some
Fire Protection: Fire Alarm Systems - Level IV Is Not In Demand	National Institute for Certification in Engineering Technologies (NICET)	Some
Fire Protection: Inspection and Testing of Water-Based Systems - Level I Is Not In Demand	National Institute for Certification in Engineering Technologies (NICET)	Most
Fire Protection: Inspection and Testing of Water-Based Systems - Level II Is Not In Demand	National Institute for Certification in Engineering Technologies (NICET)	Some
Fire Protection: Inspection and Testing of Water-Based Systems - Level III Is Not In Demand	National Institute for Certification in Engineering Technologies (NICET)	Some
Fire Protection: Special Hazards Suppression Systems - Level I Is Not In Demand	National Institute for Certification in Engineering Technologies (NICET)	Most
Fire Protection: Special Hazards Suppression Systems - Level II Is Not In Demand	National Institute for Certification in Engineering Technologies (NICET)	Some
Fire Protection: Special Hazards Suppression Systems - Level III Is Not In Demand	National Institute for Certification in Engineering Technologies (NICET)	Some
Fire Protection: Special Hazards Suppression Systems - Level IV Is Not In Demand	National Institute for Certification in Engineering Technologies (NICET)	Some
Certified Vibration Analyst - Category I Is Not In Demand	Vibration Institute	Some		Accreditation
Certified Control Systems Technician - Level II (CCST-II) Is Not In Demand	International Society of Automation (ISA)	Most
Certified Control Systems Technician - Level III (CCST-III) Is Not In Demand	International Society of Automation (ISA)	Most
Certified Vibration Analyst - Category III Is Not In Demand	Vibration Institute	Some		Accreditation
Certified Vibration Analyst - Category II Is Not In Demand	Vibration Institute	Some		Accreditation
Certified Vibration Analyst - Category IV Is Not In Demand	Vibration Institute	Some		Accreditation
Certified Balancing Specialist - Category I Is Not In Demand	Vibration Institute	Most

5352 - Industrial Equipment Mechanic

Federal Occupation Description

Federal Occupation Description

Other Federal Occupations

State Licenses

Related Civilian Private Sector Occupations

In Demand

GI Bill®

ANSI

ICAC

NCCA

ABSNC

IAS

Some

Most

Other

GI Bill^®