3378 - Precision Measurement Equipment Calibrating

Show All / Hide All

Federal Occupation Description

Federal Occupation Description

This occupation covers nonsupervisory jobs for which the primary purpose is the calibration and certification of electrical, electronic, and physical/dimensional test, measurement, and diagnostic equipment (TMDE), and reference standards. Equipment and reference standards are used to ensure the functional accuracy and operational precision of electronic systems and equipment, and must be calibrated to extreme precisions.

For job opportunities in this series, go to the Office of Personnel Management USAJOBS website.

Other Federal Occupations

It is not uncommon for individuals in one federal occupational series to perform duties related to another series within the same federal occupational group. To find out about the certifications for another series in the INSTRUMENT WORK FAMILY, click on that series below. Note that credentials have not yet been identified for all series – links are provided only to those series for which the identification of credentials has been completed. Additional series will be added over time.

The following certifications have been identified as most relevant to the broad duties of this federal occupational series. Please note that these credentials may not reflect all of the unique job functions that you perform within your organization. Also these credentials may require additional education, training or experience. For more information about any credential, click on the credential title below.

Compare Credential Agency Related As GI Bill® Accreditation ID
Certified Control Systems Technician - Level I (CCST-I) Is Not In Demand International Society of Automation (ISA) someSome    
Certified Calibration Technician (CCT) Is Not In Demand American Society for Quality (ASQ) mostMost GI BillGI Bill  
Certified Control Systems Technician - Level II (CCST-II) Is Not In Demand International Society of Automation (ISA) someSome    
Certified Control Systems Technician - Level III (CCST-III) Is Not In Demand International Society of Automation (ISA) someSome    

State Licenses

Some states have specific licensing requirements for the following related civilian occupations. These state licenses may require additional education, training or experience. Click on the occupation below to get more information on state requirements from the U.S. Department of Labor.

Related Civilian Private Sector Occupations

The following civilian private sector occupations are similar to the duties performed by 3378 - Precision Measurement Equipment Calibrating. These occupations may require additional education, training or experience. For more information about these occupations, click on the civilian occupation below.

Civilian Job Duties Matched Bright Outlook Registered Apprenticeship Local Salary Info
Electrical and Electronics Repairers, Commercial and Industrial Equipment someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Electro-Mechanical Technicians mostMost   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Inspectors, Testers, Sorters, Samplers, and Weighers someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Mechanical Engineering Technicians someSome   Registered ApprenticeshipApprenticeship  find local salaryfind local salary
Timing Device Assemblers and Adjusters someSome     find local salaryfind local salary
Top
This is an official U.S. Navy websiteUpdated: October 16, 2019
Click here to go to Certified Control Systems Technician - Level I (CCST-I) COOL Snapshot page.

Renewal Period: 3 years

ISA's Certified Control Systems Technician Program (CCST) offers third-party recognition of technicians' knowledge and skills in automation and control. CCSTs calibrate, document, troubleshoot, and repair/replace instrumentation for systems that measure and control level, temperature, pressure, flow, and other process variables. CCST certifications are available at three levels, and each level requires the successful completion of an examination. The CCST examination is only one requirement for certification. The candidate must also meet minimum requirements comprised of work experience and education.

Click here to go to Certified Calibration Technician (CCT) COOL Snapshot page.

Renewal Period: 3 years

The Certified Calibration Technician (CCT) tests, calibrates, maintains and repairs electrical, mechanical, electromechanical, analytical and electronic measuring, recording and indicating instruments and equipment for conformance to established standards. Candidate must have five years of on-the-job experience in one or more of the areas of the Certified Calibration Technician Body of Knowledge (If the candidate has completed a degree from a college, university, or technical school with accreditation accepted by ASQ, part of the five-year experience requirement will be waived). Candidate must pass a written examination.

Click here to go to Certified Control Systems Technician - Level II (CCST-II) COOL Snapshot page.

Renewal Period: 3 years

ISA's Certified Control Systems Technician Program (CCST) offers third-party recognition of technicians' knowledge and skills in automation and control. CCSTs calibrate, document, troubleshoot, and repair/replace instrumentation for systems that measure and control level, temperature, pressure, flow, and other process variables. CCST certifications are available at three levels, and each level requires the successful completion of an examination. The CCST examination is only one requirement for certification. The candidate must also meet minimum requirements comprised of work experience and education.

Click here to go to Certified Control Systems Technician - Level III (CCST-III) COOL Snapshot page.

Renewal Period: 3 years

ISA's Certified Control Systems Technician Program (CCST) offers third-party recognition of technicians' knowledge and skills in automation and control. CCSTs calibrate, document, troubleshoot, and repair/replace instrumentation for systems that measure and control level, temperature, pressure, flow, and other process variables. CCST certifications are available at three levels, and each level requires the successful completion of an examination. To qualify to sit for the CCST examination, the candidate must have a minimum of 13 years of combined education, training, and/or experience.

In Demand

This certification is considered in demand

GI Bill®

Reimbursement for exam fees has been approved for payment through the GI Bill. Click for external link to GI Bill licensing and certification information.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click here to go to the GI Bill site.

ANSI

This credential has been accredited by ANSI. Click for external link to the ANSI web site.

ICAC

This credential has been accredited by ICAC. Click for external link to the ICAC web site.

NCCA

This credentialing program has been accredited by NCCA. Click for external link to the NCCA web site.

ABSNC

This credential has been accredited by ABSNC. Click for external link to the ABSNC web site.

IAS

This credential has been accredited by IAS. Click for external link to the IAS web site.

Some

Credential is related to some tasks associated with the duties of the rating (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the rating (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater)
Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%)
Bright Outlook – new job opportunities are very likely in the future for this job
Registered Apprenticeship
Click here for the external link to: My Next Move for Veterans - Electrical and Electronics Repairers, Commercial and Industrial Equipment
Click here for the external link to: My Next Move salary info for Electrical and Electronics Repairers, Commercial and Industrial Equipment
Click here for the external link to: My Next Move for Veterans - Electro-Mechanical Technicians
Click here for the external link to: My Next Move salary info for Electro-Mechanical Technicians
Click here for the external link to: My Next Move for Veterans - Inspectors, Testers, Sorters, Samplers, and Weighers
Click here for the external link to: My Next Move salary info for Inspectors, Testers, Sorters, Samplers, and Weighers
Click here for the external link to: My Next Move for Veterans - Mechanical Engineering Technicians
Click here for the external link to: My Next Move salary info for Mechanical Engineering Technicians
Click here for the external link to: My Next Move for Veterans - Timing Device Assemblers and Adjusters
Click here for the external link to: My Next Move salary info for Timing Device Assemblers and Adjusters